CHECK AND TEST 1

Step 1

Place torch in the cabinet and check to see if any light leaks out through gasket.

Step 2

If any light leaks out through gasket, blow hot air on gasket with a hair dryer to soften gasket, so it can be easily attached to cabinet.

DIAGNOSIS 1


PROCEDURE 1

Note

When hinge adjustment is required, please start by disassembling hinge and fridge door.

Step 1

Unscrew hinge cover.

Step 2

Remove the cover.

Step 3

Disconnect the terminals.

Step 4

Unscrew 3 bolts and remove the top hinge.

Step 5

Remove fridge door.

Step 6

Unscrew 3 bolts and remove the middle hinge.

CHECK AND TEST 2

Case 1:

Light leaks out from the corner of opening side.

Note

Step 1

Add washer to make middle hinge move outward.

Step 2

Use hinge with big hole and push it out.

Step 3

Use a hair dryer to blow hot air onto gasket and make it easier to attach to cabinet.

Case 2:

Light leaks from the corner on hinge side.

Note


Step 1

Remove washer to make middle hinge move inward.

Step 2

Push top hinge in.

Step 3

Use a hair dryer to blow hot air onto gasket and make it easier to attach to cabinet.

DIAGNOSIS 2


CHECK AND TEST 3

Case 3:

Light leaks in the middle of hinge or opening side.

Step 1

Use steel ruler to measure the deformation of door and cabinet.

Step 2

Use steel ruler to measure the deformation of door and cabinet.

DIAGNOSIS 3


PROCEDURE 2

Tip 1

Don’t forget to put washer on hinge pin.

Tip 2

When inserting door on hinge, please check alignment of door- stopper and hinge.

Tip 3

Gasket must be well-attached.

Tip 4

Gaps between door must be even and equal.

Tip 5

Check to make sure the gasket plate turns over properly when the door is opened and closed.

GO BACK TO COMPONENT LIST