CHECK AND TEST 1
Step 1
Unscrew cover of mainboard with a Cross-head screwdriver.
Step 2
Check to see whether
wires in mainboard area
are broken.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Cut off the wire.
Step 2
Peel off the sleeves.
Step 3
Make sure wires are in proper order and connect them.
Step 4
Tin soldering.
Step 5
Cover connecting point with electrical tape.
Step 6
Unscrew cover of mainboard with a Cross-head screwdriver.
CHECK AND TEST 2
Step 1
Power on and perform a leakage test.
Put one detector on earthing wire of socket, and another detector on surface.
DIAGNOSIS 2
GO BACK TO COMPONENT LIST