CHECK AND TEST 1

Step 1

Check to see whether any pipes are touching.

DIAGNOSIS 1

CHECK AND TEST 2

Step 1

Check whether any pipes are touching wall od compressor area.

DIAGNOSIS 2


CHECK AND TEST 3

Step 1

Check whether pipes are touching drain pipe or drain pipe or drain tray.


DIAGNOSIS 3


CHECK AND TEST 4

Step 1

Make sure tube is well-attached to water tray.


DIAGNOSIS 4

CHECK AND TEST 5

Step 1

Shake the tray to feel if it is loose.


DIAGNOSIS 5


PROCEDURE 1


Step 1

Unscrew.

Step 2

Move evaporating pipe up.

Step 3

Push the tray in to loosen it from buckle and move tray up to take it out.

PROCEDURE 2

Tip 1

Make sure the hook is fixed onto edge of holder plate edge firmly.

CHECK AND TEST 6

Step 1

Check whether pipe is resonating noisily.

DIAGNOSIS 6

GO BACK TO COMPONENT LIST