CHECK AND TEST 1

Step 1

Measure distance
between product cabinet
and wooden cabinet
edge.

Attention: please
measure top, middle,
and bottom point on
open side of cabinet, get
value A1, A2, A3.


Step 2

Blow hot air onto gasket with hair dryer to soften, so that gasket can be easily attached onto cabinet.

Attention: please
measure top, middle,
and bottom point on
open side of cabinet, get
value B1, B2, B3.

DIAGNOSIS 1

PROCEDURE 1

Step 1

Unscrew bottom
attachment.

Step 2

Unscrew top
attachment.

Step 3

Remove the plastic
cover.



Step 4
Unscrew central
attachment on left and
right side.

Step 5

Hold cabinet and move
it out 3mm.


Reverse above
procedures to reattach
cabinet again.


Step 6

Hold cabinet and move
it out 3mm.

CHECK AND TEST 2


Step 1

1 week later, check if
there is ice in fridge.



GO BACK TO COMPONENT LIST