CHECK AND TEST 1
Step 1
Open the fridge doors to check carefully if gasket is cracked.
Step 2
Check carefully to see whether gasket is deformed.
1) Example of slight deformation.
2) Example of gasket wrinkling.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Blow hot air onto gasket with Hair Dryer to soften, so that gasket can be easily attached onto cabinet.
DIAGNOSIS 2
PROCEDURE 2
Step 1
Pull gasket out from 4 corners.
Tip 1
Start from corner.
Tip 2
Make sure gasket foot is pressed into gasket seat completely.
Tip 3
Make sure gasket is well-aligned with gasket seat.
Step 2
After replacing the doorgasket, blow hot air onto
gasket with Hair Dryer
to soften, so that gasket
can be easily attached
onto cabinet.
CHECK AND TEST 2
Step 1
Measure the width ofgasket seat opening with
Vernier calipers.
Step 2
Assessment of measuredresults.
DIAGNOSIS 3
PROCEDURE 3
Step 1
Pull gasket out from 4
corners.
Tip 1
Start from corner.
Tip 2
Make sure gasket foot ispressed into gasket seat
completely.
Tip 3
Make sure gasket iswell-aligned with gasket
seat.
Step 2
After replacing the doorgasket, blow hot air onto
gasket with Hair Dryer
to soften, so that gasket
can be easily attached
onto cabinet.
CHECK AND TEST 3
Step 1
Check internal shape of gasket seat. Use tool with same shape as gasket seat and insert into the seat. Then turn the tool around.
DIAGNOSIS 4
PROCEDURE 3
Step 1
attachment.
Step 2
Unscrew top
attachment.
Step 3
Remove the plasticcover.
Step 4
Unscrew centralattachment on left and
right side.
Step 5
Unscrew the plasticguider.
Step 6
Hold cabinet and pullappliance out.
Step 7
Unscrew the fixationplate and remove it.
Step 8
Unscrew top hinge andremove it.
Step 9
Remove fridge door.
Step 10
Reverse proceduresabove to replace fridge
door.
Pay attention to cabinet
positioning.
CHECK AND TEST 4
Step 1
Insert the gasket into
gasket seat and pull it
with a force of 30N.
DIAGNOSIS 5
CHECK AND TEST 5
Step 1
1 week later, check ifthere is water in fridge.
DIAGNOSIS 6
GO BACK TO COMPONENT LIST