CHECK AND TEST 1

Step 1

Open the fridge doors to check carefully if gasket is cracked.

Step 2

Check carefully to see whether gasket is deformed.


1) Example of slight deformation.

2) Example of serious
deformation.

DIAGNOSIS 1

PROCEDURE 1

Step 1

Blow hot air onto gasket
with Hair Dryer to soften,
so that gasket can be
easily attached onto
cabinet.

DIAGNOSIS 2


PROCEDURE 2

Step 1

Pull gasket out from 4
corners.

Tip 1

Start from corner.

Tip 2

Make sure gasket foot is
pressed into gasket seat
completely.

Tip 3

Make sure gasket is
well-aligned with gasket
seat.

Tip 4

After closing door,
make sure gasket is
well-attached to door.

CHECK AND TEST 2

Step 1

Measure the width of
gasket seat opening with
Vernier calipers.

Step 2

Assessment of measured
results.

DIAGNOSIS 3


PROCEDURE 3


Step 1

Pull gasket out from 4 corners.


Tip 1

Start from corner.

Tip 2

Make sure gasket foot is pressed into gasket seat completely.

Tip 3

After closing door, make sure gasket is well-attached to door.

CHECK AND TEST 3

Step 1

Check internal shape of gasket seat. Use tool with same shape as gasket seat and insert into the seat. Then turn the tool around.

DIAGNOSIS 4

PROCEDURE 3


Step 1

Unscrew bottom
attachment.

Step 2

Unscrew top
attachment.

Step 3

Remove the plastic
cover.

Step 4
Unscrew central
attachment on left and
right side.

Step 5

Unscrew the plastic
guider.

Step 6

Hold cabinet and pull
appliance out.

Step 7

Unscrew the fixation
plate and remove it.

Step 8

Unscrew top hinge and
remove it.

Step 9

Remove fridge door.

Step 10

Reverse procedures
above to replace fridge
door.
Pay attention to cabinet
positioning.

CHECK AND TEST 4

Step 1

Insert the gasket into gasket seat and pull it with a force of 30N.

DIAGNOSIS 5

CHECK AND TEST 5

Step 1

1 week later, check if
there is water in fridge.

DIAGNOSIS 6