CHECK AND TEST 1
Step 1
Unscrew cover of mainboard with a Cross-head screwdriver.
Step 2
Check to see whether
wires in mainboard area
are broken.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Cut off the wire.
Step 2
Peel off the sleeves.
Step 3
Make sure wires are in proper order and connect them.
Step 4
Tin soldering.
Step 5
Cover connecting point with electrical tape.
CHECK AND TEST 2
Step 1
Install the mainboard cover.
Step 2
Perform current leakage test.
Put one detector on earthing wire of socket, and another detector on surface of the appliance.
DIAGNOSIS 2
GO BACK TO COMPONENT LIST