CHECK AND TEST 1
Step 1
Unscrew cover of mainboard with a Cross-head screwdriver.
Step 2
Press the button SW1 on mainboard, within 1 minute after powering on the appliance, to start manual defrost.
Step 3
Test voltage from
terminal for defrost
heater in PCB area.
Step 4
Take note of the result. Later power off to quit manual defrost.The value should be 230V.
PROCEDURE 1
Step 1
Unscrew cover of
mainboard with a
Cross-head screwdriver.
Step 2
Disconnect terminals.
Step 3
Unscrew the mainboard.
Step 4
Prize off the buckle to remove mainboard.
Step 5
Prize off the buckle to remove mainboard.
PROCEDURE 2
DIAGNOSIS 1
GO BACK TO COMPONENT LIST