CHECK AND TEST 1

Step 1

Place a torch on shelf and point light towards gasket.

Step 2

Close fridge door to see if there is any light leaking out.

Step 3

Blow hot air to gasket by hair dryer to soften gasket so that gasket can be attached onto cabinet easily.

DIAGNOSIS 1


PROCEDURE 1


Step 1

Unscrew hinge cover.

Step 2

Remove the cover.

Step 3

Disconnect the terminals.

Step 4

Unscrew 3 bolts and remove the top hinge.

Step 5

Remove upper door.

PROCEDURE 2


Case 1:

Light leaks out from the corner of opening side.

Step 1

Unscrew 3 bolts and remove the middle hinge.

Step 2

Add washer to make middle hinge move outward, and then screw the middle hinge.

Step 3

Reinstall fridge door.

Step 4

Use top hinge with large hole and push outwards.

Case 2:

Light leaks out from the corner of hinge side.

Step 1

Unscrew 3 bolts and remove the middle hinge.

 

Step 2

Remove washer to make middle hinge move inward, and then screw the middle hinge.

Step 3

Reinstall fridge door.

Step 4

Push top hinge in.

Case 3 :

Light leaks out from the middle of opening side or hinge side.

Step 1

Use steel ruler to measure the deformation of fridge door.
If deformation is more than 3mm, replace the fridge door.

Step 2

Use steel ruler to measure the deformation of cabinet.
If deformation is more than 3mm, replace the appliance.

NOTE

Tip 1

Don’t forget to add washer onto hinge pin.

Tip 2

When installing door onto hinge, please check the alignment between door-stopper and hinge.

Tip 3

Make sure gasket is attached well.

 

Tip 4

Make sure gaps between doors are even.

 

CHECK AND TEST 2

Step 1

Place a torch on shelf and point light towards gasket.

Step 2

Close fridge door to see if there is any light leaking out.

DIAGNOSIS 2