CHECK AND TEST 1

Step 1

Check if pipes touch each other or not.

Step 2

Check if pipes touch compressor niche or not.

Step 3

Check if pipes touch drain pipe or drain tray or
not.

DIAGNOSIS 1


CHECK AND TEST 2

Step 1

Check if evaporative condenser tube is wellattached to water tray or
not.

DIAGNOSIS 2


CHECK AND TEST 3

Step 1
Shake the tray, check if it
is loose or not.

DIAGNOSIS 3



PROCEDURE 1


Step 1

Unscrew.

Step 2

Move evaporating pipe
up.

Step 3

Push the tray in to loosen it from buckle and move tray up to take it out.

REVERSE STEPS ABOVE
TO INSTALL WATER
TRAY, PAY ATTENTION
TO THE KEY POINTS
BELOW

Tip 1
Make sure the hook is
fixed onto edge of holder
plate edge firmly

CHECK AND TEST 4

Step 1
Check whether pipe is
resonating noisily

DIAGNOSIS 4


GO BACK TO COMPONENT LIST