8.9 RELIABILITY FAULTS:  

      WATER DRIPS FROM

      WATER DISPENSER

CHECK AND TEST 1

Step 1                                  Dispenser drips or doesn’t expel water.

 

Step 2                                     Check if water tank is pushed into final
position.


DIAGNOSIS 1


CHECK AND TEST 2

Step 1

Remove tank.

Step 2

Check to see if valve is screwed into final
position.

 

Step 3

Check to see if the slot on door for water tank is deformed.

DIAGNOSIS 2

CHECK AND TEST 3

Step 1

Check to see whether the slot on water tank is
deformed or not.

DIAGNOSIS 3

CHECK AND TEST 4

Step 1

Check if the rubber
washer is broken or not.

Step 2

Loosen the latch.

Step 3

Remove the cover.


Step 4                                   Lever off the another washer.

Step 5

Remove the washer and verify whether it is
broken.

DIAGNOSIS 4


CHECK AND TEST 5

Step 1

Check the attachment of rubber core.

DIAGNOSIS 5


CHECK AND TEST 6

Step 1

Pull the bottom part of valve.

Step 2

Disassemble it.

Step 3

Check if the rubber is cracked or deformed.

DIAGNOSIS 6

CHECK AND TEST 7

Step 1

Measure the free length of spring.

DIAGNOSIS 7


CHECK AND TEST 8

Step 1

Pull out the tap.

Step 2

Check if white plastic is broken or deformed.

If so, pull it out to replace it.

GO BACK TO FAULT LIST RELIABILITY