PROCEDURE 1

Note

Entrance of drain pipe is covered by freezer air duct, you need to disassemble freezer air duct and remove evaporator to check it.

Step 1

Remove all freezer drawers.

Step 2

Remove all glass shelves.

Step 3

Remove the 3 screw covers.

Step 4

Remove the 3 screws.

 

Step 5

Pull air duct out.

Step 6

Disconnect the terminal of fan motor.

Step 7

Remove the air duct.

CHECK AND TEST 1

Step 1

Check if drain pipe is blocked with ice or foam.

DIAGNOSIS 1


Case 1:

Drain pipe is blocked with foam.

Use metal rod with tip head to smash foam in drain pipe.

Case 2:

Drain pipe is blocked with ice.

Blow hot air to melt the ice, and then add a heat- conducting wire between defrost heater and drain hole.

PROCEDURE 2


Tip 1

Make sure the sealing sponges are in good condition.

Tip 2

When reinstalling the air duct, fasten the wires to avoid crushing with air duct.

Tip 3

Install the top side first when installing the air duct.

Tip 4

After pushing air duct into place, you should hear a clicking sound. If not, repeat again.

Tip 5

Check to see if there is
a wide gap between air duct and cabinet. If there is, reinstall air duct.