CHECK AND TEST 1
Step 1
Check to see if the wheel is missing, deformed or cracked.
Step 2
Make sure compressor plate isn’t deformed.
DIAGNOSIS 1
GENERAL PROCEDURES TO DISASSEMBLE AND INSTALL COMPRESSOR HOLDER PLATE
Step 1
Unscrew earthing wire.
Step 2
Unscrew the nut of compressor.
Step 3
Lay down product so that compressor is resting on foam.
Step 4
Unscrew and remove
compressor plate
REVERSE STEPS ABOVE TO INSTALL THE COMPRESSOR HOLDER PLATE
GO BACK TO COMPONENT LIST