9.3 APPEARANCE FAULTS
DOOR IS DAMAGED
GENERAL PROCEDURES FOR DISASSEMBLY AND INSTALLATION DOOR.
Step 1
Unscrew hinge cover.
Step 2
Remove the cover.
Step 3
Disconnect the terminals.
Step 4
Unscrew bolts and remove the top hinge.
Step 5
Remove upper door.
Step 6
Unscrew 3 bolts and remove the middle hinge.
Step 7
Remove lower door.
Step 8
Tilt cabinet.
Step 9
Unscrew the adjustable foot.
Step 10
Unscrew the adjustable foot.
Please note below point.
Tip 1
Don’t forget to add washer onto hinge pin.
Tip 2
When installing door onto hinge, please check the match between door- stopper and hinge.
Tip 3
Make sure gasket is attached well.
Tip 4
Make sure gaps between doors are even.
GO BACK TO FAULT LIST APPEARANCE