CHECK AND TEST 1

Step 1

Open the fridge doors to check carefully if gasket is cracked.

Step 2

Check carefully to see whether gasket is deformed. 

Case 1:

Example of slight deformation.

Case 2:

Example of gasket wrinkling.

DIAGNOSIS 1



PROCEDURE 1

Step 1

Blow hot air on gasket with a hair dryer to soften gasket, so it can be easily attached to cabinet.

DIAGNOSIS 2



PROCEDURE 2

Step 1

Pull gasket out from 4 corners.

Step 2

Install a new gasket.

Pay attention the important tips for installing gasket.

Tip 1

Start from corner.

Tip 2

Make sure gasket foot is pressed into gasket seat completely.

Tip 3

Make sure gasket is well-aligned with gasket seat.

Tip 4

After closing door, make sure gasket is well-attached to door.

Step 3

After replacing the door gasket, blow hot air onto gasket with Hair Dryer to soften, so that gasket can be easily attached onto cabinet.

DIAGNOSIS 3

Step 1

Place a torch in cabinet and check to see if light leaks out from gasket.

CHECK AND TEST 3

Step 1

Measure the width of gasket seat opening with Vernier calipers.

Step 2

Assessment of results measured value.
DIAGNOSIS 4

CHECK AND TEST 4

Step 1

Check internal shape of gasket seat. Use tool with same shape as gasket seat and insert into the seat. Then turn the tool around.

DIAGNOSIS 5

PROCEDURE 3

Step 1

 Unscrew hinge cover.

Step 2

Remove the cover.

Step 3

Unscrew 3 bolts and remove the top hinge.

Step 4

Remove upper door.

Step 5

Unscrew 2 bolts and remove the middle hinge.

Step 6

Remove bottom door.

NOTE

CHECK AND TEST 5

Step 1

Make sure gasket isn’t detaching anywhere.

Step 2

Insert the gasket into gasket seat and pull it with a force of 30N.

DIAGNOSIS 6

PROCEDURE 4

Note

Photo is not accurate, but just to show the technique. 

Step 1

After replacing the gasket, blow hot air onto gasket with Hair Dryer to soften, so that gasket can be easily attached onto cabinet.

Tip 1

Don’t forget to add a washer onto hinge pin.

Tip 2

When installing door onto hinge, please check the alignment of doorstopper and hinge.

Tip 3

Make sure gasket is properly attached.

Tip 4

Make sure gaps between doors are even.

DIAGNOSIS 7

Place a torch in cabinet and check to see if light leaks out from gasket.