NOTE

PROCEDURE 1

Step 1

Unscrew LED cover.

Step 2

Remove LED cover.

Step 3

Unscrew thermostat cover.

Step 4

Lever off the buckle and push the thermostat out.

Step 5

Disconnect terminal for LED.

Step 6

Lever off LED plate.

CHECK AND TEST 1

Step 1

Connect new LED onto terminal and plug in to switch on the appliance.

DIAGNOSIS 1

PROCEDURE 2

Tips 1:

When inserting capillary into the hole, make sure the first red mark goes in the hole, but second one remains outside of the hole.

Tips 2:

When inserting thermostat into the buckle, please push the control knob into the buckle first.

Tips 3:

Make sure wires are twisted around screw hole to avoid damaging wires with screw.

NOTE

PROCEDURE 1

Step 1

Lever off screw cover.

Step 2

Unscrew.

Step 3

Remove thermostat box.

Step 4

Disconnect terminal for LED.

Step 5

Lever off LED plate.

CHECK AND TEST 1

Step 1

Connect new LED onto terminal and plug in to switch on the appliance.

DIAGNOSIS 1

PROCEDURE 2

Tips1:

When inserting capillary into the hole, make sure the first red mark goes into the hole, but second one remains outside of the hole.

Tips 2:

Make sure the pins of thermostat cover are inserted into the holes.

Tips 3:

Make sure wires are placed into cavity of thermostat.

GO BACK TO COMPONENT LIST