DIAGNOSIS 1

PROCEDURE 1

Step 1

Unscrew hinge cover.

Step 2

Remove the cover.

Step 3

Unscrew 3 bolts and remove the top hinge.

Step 4

Remove upper door.

Step 5

Unscrew 2 bolts and remove the middle hinge.

Step 6

Remove bottom door.

Step 7

Tilt cabinet by 10 degrees.

Step 8

Unscrew the adjustable foot.

Step 9

Unscrew 2 bolts and remove bottom hinge.

CHECK AND TEST 1

Step 1

Check to see whether hinge is deformed or cracked and whether screws are loose.

DIAGNOSIS 2

PROCEDURE 1

Tip 1

Don’t forget to add washer onto hinge pin.

Tip 2

When installing door onto hinge, please check the alignment of doorstopper and hinge.

Tip 3

Make sure gasket is properly attached.

Tip 4

Make sure gaps between doors are even.

GO BACK TO FAULT LIST RELIABILITY