8.8 RELIABILITY PROBLEMS:
WATER DRIPS FROM WATER DISPENSER
CHECK AND TEST 1
Step 1
Check to see whether dispenser drip or doesn't expel water.
Step 2
Check to see whether dispenser drip or doesn't expel water.
DIAGNOSIS 1
CHECK AND TEST 2
Step 1
Remove tank.
Step 2
Check to see if the slot on door for water tank is deformed.
Step 3
Check to see if the slot on water tank is deformed.
Step 4
Check to see if the rubber washer is broken.
Step 5
Loosen the latch.
Step 6
Remove the cover.
Step 7
Lever off the other washer.
Step 8
Remove the washer and check if it is broken.
Step 9
Check the attachement of rubber core.
Step 10
Pull the bottom part of valve.
Step 11
Disassemble it.
Step 12
Check to see if the rubber is cracked or deformed.
Step 13
Measure the free length of spring.
Step 14
Pull out the tap.
Step 15
Check if white plastic is broken or deformed.
