8.5 RELIABILITY FAULTS:

      DOOR ALIGNMENT PROBLEMS

CHECK AND TEST 1


Step 1

Use steel ruler to measure the gap and misalignment.

DIAGNOSIS 1

PROCEDURE 1


Step 1

Prize up the top side of lower hinge cover.

Step 2

Remove the hinge cover.

Step 3

Prize up the upper hinge cover with a screwdriver.

Step 4

Unscrew upper hinge part.

Step 5

Unscrew lower hinge part.

Step 6

Adjust the door position to align door with the cabinet.

Reverse above procedures to reinstall hinges and doors, however, please pay attention to points below:

Tip 1

Make sure gasket is properly attached.

Tip 2

Make sure the door is parallel to the cabinet.

DIAGNOSIS 2

GO BACK TO FAULT LIST RELIABILITY