CHECK AND TEST 1
Step 1
Open the freezer door.
Step 2
Prize up one side of the light cover.
Step 3
Remove the light cover.
Step 4
Unscrew the screws of light bracket.
Step 5
Take out the light as well as the bracket.
Step 6
Disconnect the connector.
Step 7
Power on the appliance, measure the voltage of terminal of the door.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Prize up the LED PCB cover with screwdriver.
Step 2
Remove the LED PCB cover.
Step 3
Replace the LED PCB.
Reverse above steps to reinstall the new light.
CHECK AND TEST 2
Step 1
Power on the appliance and open door to check if the light turns on or not.
DIAGNOSIS 2
GO BACK TO COMPONENT LIST