CHECK AND TEST 1


Step 1

Check to see if drain channel is full of water.

Step 2

Insert a stiff cord or belt into pipe.

Step 3

If the belt can pass through the pipe, it is blocked with soft food material.

PROCEDURE 1

Step 1

Twist the belt to loosen food material stuck on pipe wall, then use water to flush food material out of pipe.

CHECK AND TEST 2

Step 1

If belt could not pass through the drain pipe and water is still in channel, mark the belt
at blockage point.

Step 2

Measure the length.

Step 3

Compare the length with data on drawing and check the usage time.

DIAGNOSIS 1

PROCEDURE 2

DIAGNOSIS 2


Method for testing rework: pour water into drain channel.