CHECK AND TEST 1
Step 1
Open the fridge doors to check carefully if gasket is cracked.
Step 2
Check carefully to see
whether gasket is deformed.
Case 1
Example of slight deformation.
Case 2
Example of gasket
wrinkling.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Blow hot air onto gasket with Hair Dryer to soften, so that gasket can be easily attached onto cabinet.
DIAGNOSIS 2
Step 1
Pull gasket out from 4 corners.
Step 2
Install a new gasket.
Tip 1
Start from corner.
Tip 2
Make sure gasket foot is pressed into gasket seat completely.
Tip 3
Make sure gasket is well-aligned with gasket seat.
Tip 4
After closing door, make sure gasket is well-attached to door.
Step 3
After replacing the door gasket, blow hot air onto gasket with Hair Dryer to soften, so that gasket can be easily attached onto cabinet.
DIAGNOSIS 3
Step 1
Place a torch in cabinet and check to see if light leaks out from gasket.
CHECK AND TEST 3
Step 1
Measure the width of gasket seat opening with Vernier calipers.
Step 2
Assessment of results after completing step 7 and rework method.
Step 3
Use tool with same shape as gasket seat and insert into the seat. Then turn the tool
around.
Step 1
Pull gasket out from 4 corners.
Step 2
Tip 1
Start from corner.
Tip 2
Make sure gasket foot is pressed into gasket seat completely.
Tip 3
Make sure gasket is well-aligned with gasket
seat.
Tip 4
After closing door, make sure gasket is
well-attached to door.
CHECK AND TEST 4
Step 1
Test for new door: Insert the gasket into gasket seat and pull it with a force of 30N.
Step 1
Prize up screw cover.
Step 2
Unscrew.
Step 3
Push the top cover forward.
Step 4
Take away the top cover.
Step 5
Unscrew 3 bolts and remove door hinge.
Step 6
Remove the door.
Tip 1
If there is pin, don’t forget to add a washer onto hinge pin.
Tip 2
If there is a door-stopper, when installing door onto hinge, please check the alignment of doorstopper and hinge.
Tip 3
Make sure gasket is properly attached.
Tip 4
Make sure the door is parallel to the cabinet(top cover).
CHECK AND TEST 4
Step 1
Place a torch in cabinet and check to see if light leaks out from gasket.
