8.5 RELIABILITY FAULTS:
NOISE WHEN DOOR OPENS
AND CLOSES
CHECK AND TEST 1
Step 1
Check to verify whethe door and shelves are in
normal position, and whether there is abnormal friction between food packages and appliance walls.
Step 2
If yes, move food materials until the noise
disappears.
Step 3
Listen carefully to determine source of
noise.
Step 4
Use small brush to add Vaseline onto hinge pins and inside hinge holes. Open and shut door several times. Repeat above steps until noise disappears completely.
Step 1
Prize up screw cover.
Step 2
Unscrew.
Step 3
Push the top cover forward.
Step 4
Take away the top cover.
Step 5
Unscrew 3 bolts and remove door hinge.
Step 6
Remove the door.
Step 7
Lay down the cabinet and unscrew the adjustable foot.
Step 1
Move bottom hinge toward left or right.
CHECK AND TEST 2
Step 1
Check to see if there are any burrs on hinge pins. If yes, please polish the pin to remove burrs.
Tip 1
Don’t forget to add washer onto hinge pin
(if there is one).
Tip 2
When installing door onto hinge, please check
the alignment between door-stopper and hinge.
Tip 3
Make sure gasket is properly attached.
Tip 4
Make sure the door is parallel to the cabinet.
