CHECK AND TEST 1

Step 1

Check to see if hinge and sleeve for hinge pin are damaged or not.

DIAGNOSIS 1
PROCEDURE 1

Step 1

Prize up screw cover.

Step 2

Unscrew.

Step 4

Push the top cover forward.

Step 4

Take away the top cover.

Step 5

Unscrew 3 bolts and remove door hinge.

Step 6

Remove the door.

Step 7

Lay down the cabinet and unscrew the
adjustable foot.

Step 8

Unscrew 2 bolts and remove bottom hinge.

PROCEDURE 2

Tip 1

Don’t forget to add washer onto hinge pin
(if there is one).

Tip 2

When installing door onto hinge, please check
the alignment between door-stopper and hinge.

Tip 3

Make sure gasket is properly attached.

Tip 4

Make sure the door is parallel to the cabinet.

GO BACK TO FAULT LIST RELIABILITY