CHECK AND TEST 1

Step 1

Observe the alignment between door stopper
and hinge to determine root causes.

Case 1:
Screw is not driven into proper final position, causing misalignment between door stopper
and hinge. Drive it in with a screw driver.

Case 2:
Door stopper is deformed and causing
misalignment.

Case 3:
Too many washers are causing misalignment
between door stopper and hinge.

DIAGNOSIS 1

PROCEDURES 1

Step 1

Prize up screw cover.

Step 2

Unscrew.

Step 3

Push the top cover forward.

Step 4

Take away the top cover.

Step 5

Unscrew 3 bolts and remove door hinge.

Step 6

Remove the door.

Step 7

Unscrew and remove deformed door-stopper,
and attach a new one onto top door.

PROCEDURE 2

Tip 1

If there is a washer on hinge, please don’t
forget to add washer onto hinge pin.

Tip 2

When installing door onto hinge, please check
the alignment of doorstopper and hinge.

Tip 3

Make sure gasket is properly attached.

Tip 4

Make sure the door is parallel to the cabinet(top
cover).

DIAGNOSIS 1