CHECK AND TEST 1
Step 1
Open the fridge doors to check carefully if gasket is cracked.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Pull gasket out from 4 corners.
Step 2
Install a new gasket.
Tip 1
Start from corner.
Tip 2
Make sure gasket foot is pressed into gasket seat completely.
Tip 3
Make sure gasket is well-aligned with gasket seat.
Tip 4
After closing door, make sure gasket is well-attached to door.
CHECK AND TEST 2
Step 1
Check to see if gasket is
deformed.
1) Example of slight
deformation.
2) Example of serious deformation.
Step 2
If gasket is deformed slightly, blow hot air onto gasket with Hair Dryer to soften, so that gasket can be easily attached onto cabinet.
Step 3
If gasket is deformed seriously, please measure the width of gasket seat opening with Vernier calipers.
Step 4
Assessment of results after completing step 3 and rework method.
Step 5
Use tool with same shape as gasket seat and insert into the seat. Then turn the tool around.
DIAGNOSIS 2
PROCEDURE 2
Step 1
Pull gasket out from 4 corners.
Step 2
Install a new gasket.
Tip 1
Start from corner.
Tip 2
Make sure gasket foot is pressed into gasket seat completely.
Tip 3
Make sure gasket is well-aligned with gasket seat.
Tip 4
After closing door, make sure gasket is well-attached to door.
CHECK AND TEST 3
Step 1
Test for new door:
Insert the gasket into
gasket seat and pull it
with a force of 30N.
DIAGNOSIS 3
PROCEDURE 3
Step 1
Remove the screw cover.
Step 2
Unscrew.
Step 3
Remove top cover.
Step 4
Unscrew 3 bolts and remove the door hinge.
Step 5
Remove upper door.
Step 6
Unscrew 2 bolts and remove the middle hinge.
Step 7
Remove bottom door.
PROCEDURE 4
Tip 1
Don’t forget to add a washer onto hinge pin.
Tip 2
When installing door onto hinge, please check the alignment of door stopper and hinge.
Tip 3
Blow hot air to make sure gasket is properly attached.
Tip 4
Make sure gaps between doors are even.
Tip 5
Make sure gasket isn’t detaching anywhere.
CHECK AND TEST 4
Step 1
Place a torch in cabinet and check to see if light leaks out from gasket.
