PROCEDURE 1
NOTE
Before testing LED light, please follow procedure 1 to disassembly LED first.
Step 1
Lever off screw cover.
Step 2
Unscrew.
Step 3
Remove thermostat box.
Step 4
Disconnect terminal for LED.
Step 5
Lever off LED plate.
CHECK AND TEST 1
Step 1
Connect new LED onto terminal and plug in to switch on the appliance.
DIAGNOSIS 1
PROCEDURE 2
Tip 1
When inserting capillary into the hole, make sure the first red mark goes into the hole, but second one remains outside of the hole.
Tip 2
Make sure the pins of thermostat cover are inserted into the holes.
Tip 3
Make sure wires are placed into cavity of thermostat.
GO BACK TO COMPONENT LIST