Door-stopper is broken

CHECK AND TEST 1

Step 1

Observe the alignment between door stopper and hinge to determine root causes.

Case 1:

Screw is not driven into proper final position, causing misalignment between door stopper and hinge.
Drive it in with a screw driver.

Case 2 :

Door stopper is deformed and causing misalignment.

Case 3 :

Too many washers are causing misalignment between door stopper and hinge.

DIAGNOSIS 2

PROCEDURE 1

Step 1

Remove the top cover.

Step 2

Unscrew.

Step 3

Remove top cover.

Step 4

Unscrew 3 bolts and remove the door hinge.

Step 5

Remove upper door.

Step 6

Unscrew 2 bolts and remove the middle hinge.

Step 7

Remove bottom door.

PROCEDURE 2

Step 1

Unscrew and remove deformed door-stopper, and attach a new one onto the door.

Step 2

Add or reduce washers to correct alignment.

PROCEDURE 3

Tip 1

Don’t forget to add a washer onto hinge pin.

Tip 2

When installing door onto hinge, please check the alignment of door stopper and hinge.

Tip 3

Make sure gasket is properly attached.

Tip 4

Make sure gaps between doors are even.

DIAGNOSIS 2

GO BACK TO FAULT LIST RELIABILITY