9.5 APPEARANCE FAULTS:
COMPRESSOR PLATE IS DAMAGED
PROCEDURE 1
Step 1
Verify whether compressor plate is deformed by more than 30mm.
Step 2
Check to see if supporting wheel is deformed or cracked.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Unscrew power line and earthing wire.
Step 2
Unscrew nut for compressor.
Step 3
Lay down product so that compressor is resting on foam.
Step 4
Unscrew compressor
plate and remove.
Reverse above steps to install a new plate.
GO BACK TO APPEARANCE FAULT LIST