CHECK AND TEST 1

Step 1

Door edge is not aligned with cabinet side plate.

Step 2

Horizontal gap is not even.

Step 3

Misalignment in fore-and-aft direction.

DIAGNOSIS 1

PROCEDURE 1

Step 1

Remove the top cover.

Step 2

Unscrew

Step 3

Remove top cover.

Step 4

Unscrew 3 bolts and remove the door hinge.

Step 5

Remove upper door.

Step 6

Loosen 2 bolts for middle hinge.

PROCEDURE 2

Step 1

Move middle hinge inward or outward.

Step 2

Move the top hinge inward or outward.

Step 3

Add washer to middle hinge or move top and bottom hinge inward or outward.

Step 4

Move the top hinge inward or outward.

PROCEDURE 3

Tip 1

Don’t forget to add washer onto hinge pin.

Tip 2

When installing door onto hinge, please check the alignment of door stopper and hinge.

Tip 3

Make sure gasket is properly attached.

Tip 4

Make sure gaps between doors are even.

DIAGNOSIS 3

GO BACK TO FAULT LIST RELIABILITY