CHECK AND TEST 1

Step 1

Check to see if hinge and sleeve for hinge pin are damaged or not.

DIAGNOSIS 1

PROCEDURE 1

Step 1

Remove the top cover.

Step 2

Unscrew.

 

Step 3

Remove top cover.

Step 4

Unscrew 3 bolts and remove the door hinge.

Step 5

Remove upper door.

Step 6

Unscrew 2 bolts and remove the middle hinge.

Step 7

Remove bottom door.

Step 8

Tilt cabinet by 10 degrees.

Step 9

Unscrew the adjustable foot.

Step 10

Unscrew 2 bolts and remove bottom hinge.

PROCEDURE 2

Tip 1

Don’t forget to add washer onto hinge pin.

Tip 2

When installing door onto hinge, please check the alignment of door stopper and hinge.

Tip 3

Make sure gasket is properly attached.

Tip 4

Make sure gaps between doors are even.

DIAGNOSIS 2

GO BACK TO FAULT LIST RELIABILITY