PROCEDURE 1


Step 1

Use 2mm slotted
screw driver to lever off
decorative cover.

Step 2

Unscrew LED cover
with a Cross-head
screwdriver.

Step 3
Unscrew cover of
mainboard with a
Cross-head screwdriver.

Step 4

Remove mainboard
cover.

Step 5

Disconnect terminals on
mainboard.

CHECK AND TEST 1

Step 1

Check to see if wire in
mainboard box is broken
or not.


DIAGNOSIS 1

PROCEDURE 2

Step 1

Cut off the wire.


Step 2

Peel off the sleeves.



Step 3
Ensure proper wire order
and connect.


Step 4

Tin soldering.


Step 5
Cover connecting point
with electrical tape.


DIAGNOSIS 2


GO BACK TO COMPONENT LIST