PROCEDURE 1

Step 1

Remove freezer drawer.

Step 2

Remove the middle glass shelf located
between upper and bottom freezer drawer
compartments.


Step 3

Unscrew air duct


a. Check the freezer air
duct to find the three
screw covers.


b. Remove the screw
covers (total of three)
on the air duct with
slotted screw driver.



c. Unscrew all three screws with crosshead screw driver.

Step 4

Dismantle the air duct.

a. Catch the bottom of
air duct.

b. Pull air duct out from below from the
bottom of air duct.

c. Pay attention to the
connectors when
pulling out the air
duct.

d. Disconnect the terminal for fan motor

e. Disconnect the terminal of temp.
sensor.


f. Take the air duct out of the freezer
compartment.


CHECK AND TEST 1

Step 1

Check whether there is a
lot of ice near the left or
right plug-in plate. If so,
go to next step; if not, go
to procedure 2 on next
page.

Step 2

Check whether the sealing between plug-in
plate and cabinet is good or not, pull the plug-in plate to take it out.


Step 3

Check the sealing sponge of plug-in plate
and freezer air duct.
If the sealing sponge is missing or broken,
replace or add new sealing sponge to ensure
the sealing performance of air-duct and plug-in
plate.

PROCEDURE 2


Tip 1

When re-installing the air duct, move the wires out of the way so that they won’t be crushed by air duct.

Tip 2
After pushing air duct into position, it should
make a click sound. If no click is heard, do it again

PROCEDURE 3


GO BACK TO COMPONENT LIST