CHECK AND TEST 1
Step 1
Check if the power cord in the compressor room is damaged.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Cut off the wire.
Step 2
Peel off the sleeves.
Step 3
Make sure wires are in proper order and connect them.
Step 4
Tin soldering.
Step 5
Cover connecting point with electrical tape.
CHECK AND TEST 2
Step 1
Power on and perform a
leakage test.
Put one detector on
earthing wire of socket,
and another detector on
processing pipe.
DIAGNOSIS 2
GO BACK TO COMPONENT LIST