CHECK AND TEST 1

Step 1                                 Place torch in the cabinet and check to see if any light leaks out through gasket.

Step 2

If any light leaks out through gasket, blow hot air on gasket with a hair dryer to soften gasket, so it can be easily attached to cabinet.

 

DIAGNOSIS 1

PROCEDURE 1

Note                                        When adjustment is required, please disassemble hinge and fridge door first.

Step 1

Unscrew hinge cover.

Step 2

Remove the cover.

Step 3

Disconnect the terminals.

Step 4

Unscrew 3 bolts and remove the top hinge.


Step 5

Remove fridge door.

Step 6

Unscrew 3 bolts and remove the middle hinge.

CHECK AND TEST 2


Case 1:                                           Light leaks out from the corner of opening side


NOTE


Step 1

Add washer to make middle hinge move outward.


Step 2

Use hinge with big hole and push it out.


Step 3

Use a hair dryer to blow hot air onto gasket and make it easier to attach to cabinet.


Case 2:                                          Light leaks from the corner on hinge side.


NOTE


Step 1

Remove washer to make middle hinge move inward.


Step 2

Push top hinge in.


Step 3

Use a hair dryer to blow hot air onto gasket and make it easier to attach to cabinet.


DIAGNOSIS 2


CHECK AND TEST 3

Case 3:                                           Light leaks in the middle of hinge or opening side.


Step 1

Use steel ruler to measure the deformation of door and cabinet.


Step 2

Use steel ruler to measure the deformation of door and cabinet.


DIAGNOSIS 3


PROCEDURE 2


Tip 1

Don’t forget to put washer on hinge pin.


Tip 2

When inserting door on hinge, please check alignment of door- stopper and hinge.


Tip 3

Gasket must be well-attached.


Tip 4

Gaps between door must be even and equal.



Tip 5

Check to make sure the gasket plate turns over properly when the door is opened and closed.


GO BACK TO COMPONENT LIST