CHECK AND TEST 1
Step 1
Check to see if there is ice on the bottom of
freezer department.
Step 1
Pull out the drawers.
Step 2
Take out the shelves.
Step 3
Unscrew the 4 screws.
Step 4
Hold the bottom of air duct and pull it out.
Step 5
Disconnect the terminal of fan motor.
Step 6
Remove air duct.
CHECK AND TEST 2
Step 1
Insert a plastic belt from the entrance and pass
through the pipe.
Step 2
If belt passes through, pipe is ok. If not, check
to see if there is any foam blocking the pipe.
If so, use screw driver to remove foam.
Step 3
Check to see if there is ice in the hole.
Step 4
If so, add conducting wires.
Tip 1
Before installing the air duct, please tie all wires
together.
Tip 2
Before installing the air duct, please fix cord of
fan well.
Tip 3
Insert left side first, then other side. Make sure
the cavity on the side is aligned with the ribs on
inner liner.
Tip 4
Check to see if there is a wide gap between air
duct and cabinet. If so, install air duct again.
GO BACK TO CHOOSE YOUR MANUAL