CHECK AND TEST 1

Step 1

Open fridge doors to check carefully to see if gasket is cracked. 

Step 2

Check carefully to see if gasket is deformed. 

DIAGNOSIS 1

PROCEDURE 1


Step 1

Pull gasket out from corner.

TIPS FOR INSTALLING GASKET: 

Tip 1

Start from corner.

Tip 2

Make sure base of gasket is pressed into
trough completely.

Tip 3

Make sure gasket is properly aligned with edges of trough. 

Tip 4

After closing the door, make sure gasket is well attached onto door. 

Tip 5

Make sure gaps between doors are even.

CHECK AND TEST 2

Step 1

Check to make sure that gasket is not wrinkling. 

DIAGNOSIS 2


CHECK AND TEST 3

Step 1

Measure entrance width of gasket seat with vernier calipers. 

Step 2

Use tool of same shape as gasket seat and insert into gasket seat, then flip the tool around. 

DIAGNOSIS 3


PROCEDURE 2

Step 1

Unscrew hinge cover.

Step 2

Remove the cover.

Step 3

Unscrew 3 bolts and remove the top hinge.

Step 4

Remove fridge door.

Step 5

Unscrew 2 bolts and remove the middle hinge.

Step 6

Remove bottom door.
PROCEDURE 3

Tip 1

Don’t forget to add a washer onto hinge pin.

Tip 2

When installing door onto hinge, please
check the alignment of doorstopper and hinge.

Tip 3

Make sure gasket is properly attached.

Tip 4

Make sure gaps between doors are even.

Tip 5

Make sure gasket isn’t detaching anywhere.

Tip 6

Insert the gasket into gasket seat and pull it
with a force of 30N.

DIAGNOSIS 4

CHECK AND TEST 4

Step 1

Place a torch in cabinet and check to see if light
leaks out from gasket.

DIAGNOSIS 5

GO BACK TO COMPONENT LIST