CHECK AND TEST 1

Step 1

Unscrew the locking plastic.

Step 2

Remove the blue plastic. 

Step 3

Lever off the terminal box.

Step 4

Check wether the wires are broken.

DIAGNOSIS 1

PROCEDURE 1


Step 1

Cut off the wire. 

Step 2

Peel off the sleeves.

Step 3

Make sure wires are in proper order and connect them. 

Step 4

Tin soldering.

Step 5

Cover connecting point with electrical tape. 

CHECK AND TEST 2

Step 1

Perform current leakage test:
Put one detector on earthing wire of socket, and another detector on processing pipe. 

DIAGNOSIS 2


GO BACK TO COMPONENT LIST