CHECK AND TEST 1
Step 1
Check to see whether middle hinge is deformed
or cracked and whether screws are loose.
Step 1
Unscrew hinge cover.
Step 2
Remove the cover.
Step 3
Unscrew 3 bolts and remove the top hinge.
Step 4
Remove upper door.
Step 5
Unscrew 2 bolts and remove the middle hinge
Step 6
Remove bottom door.
Step 7
Tilt cabinet by 10 degrees.
Step 8
Unscrew the adjustable foot.
Step 9
Unscrew 2 bolts and remove bottom hinge.
Reverse above steps to reinstall or replace
hinges and doors, however, please pay
attention to points below:
Tip 1
Don’t forget to add washer onto hinge pin.
Tip 2
When installing door onto hinge, please
check the alignment of doorstopper and hinge.
Tip 3
Make sure gasket is properly attached.
Tip 4
Make sure gaps between doors are even.
GO BACK TO FAULT LIST RELIABILITY