CHECK AND TEST 1

Step 1

Verify if compressor plate
is deformed by more
than 30mm.

Step 2

Check to see if
supporting wheel is
deformed or cracked.

DIAGNOSIS 1


PROCEDURE 1


Step 1

Unscrew power line and
earthing wire.

Step 2

Unscrew the nut of
compressor.

Step 3

Lay down product so
that compressor resting
on foam.

Step 4

Unscrew compressor
plate and remove.

Reverse steps above
to replace the plate.

DIAGNOSIS 2


GO BACK TO COMPONENT LIST