CHECK AND TEST 1

Step 1

Pull up to remove inverter box.

Step 2

Disconnect terminals.

Step 3

Check wether the wires are broken.

DIAGNOSIS 1

PROCEDURE 1

Step 1

Cut off the wire.

Step 2

Peel off the sleeves.

Step 3

Make sure wires are in proper order and connect them.

Step 4

Tin soldering.

Step 5

Cover connecting point with electrical tape.

CHECK AND TEST 2

Step 1

Perform current leakage test:
Put one detector on earthing wire of socket, and another detector on processing pipe.

DIAGNOSIS 2

GO BACK TO COMPONENT LIST