CHECK AND TEST 1

Step 1

Insert slotted screw into edge of switch and lever switch edge outwards.

Step 2

Prize top edge of switch out.

Step 3

Lever switch out of buckle.

Step 4

Check the connection of switch.
Correct connection:
NC & COM

DIAGNOSIS 1
PROCEDURE 1

Step 1

Cut off the wire.

Step 2

Peel off the sleeves.

Step 3
Make sure wires are in proper order and
connect them.

Step 4

Tin soldering.

Step 5
Cover connecting point with electrical tape.

PROCEDURE 2

Step 1

Insert slotted screw into edge of switch and lever switch edge outwards.

Step 2

Prize top edge of switch
out.

Step 3

Lever switch out of buckle.

Step 4
Check the connection of switch.
Correct connection:
NC & COM

Reverse steps above to reinstall or replace
door switch. Please pay attention to key points below:

Tip 1

Polish any scratches caused during
disassemble and reverse steps 1 to 3 to reinstall switch.

DIAGNOSIS 1

GO BACK TO COMPONENT LIST