9.5 APPEARANCE FAULTS:
      COMPRESSOR PLATE IS DAMAGED

CHECK AND TEST 1

Step 1

Verify whether
compressor plate is
deformed by more than
30mm.

Step 2

Check to see if
supporting wheel is
deformed or cracked.

DIAGNOSIS 1
PROCEDURE 1

Step 1

Uncsrew power line and
earthing wire.

Step 2

Unscrew nut for
compressor.

Step 3

Lay down product so
that compressor resting
on foam.

Step 4

Unscrew compressor
plate and remove.

Reverse above steps
to install a new plate.

GO BACK TO FAULT LIST APPEARANCE