CHECK AND TEST 1
Step 1
Open fridge doors to check carefully to see if gasket is cracked.
Step 2
Check carefully to see if gasket is deformed.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Pull gasket out from corner.
TIPS FOR INSTALLING GASKET.
Tip 1
Start from corner.
Step 2
Make sure base of gasket is pressed into
trough completely.
Tip 3
Make sure gasket is properly aligned with
edges of trough.
Tip 4
After closing the door, make sure gasket is well
attached onto door.
Tip 5
Make sure gaps between doors are even.
CHECK AND TEST 2
Step 1
Check to make sure that gasket is not wrinkling.
CHECK AND TEST 3
Step 1
Measure entrance width of gasket seat with
vernier calipers.
Step 2
Use tool of same shape as gasket seat and insert into gasket seat, then flip the tool around.
DIAGNOSIS 3
Step 1
Unscrew hinge cover.
Step 2
Remove the cover.
Step 3
Unscrew 3 bolts and remove the top hinge.
Step 4
Remove fridge door.
Tip 1
Don’t forget to add a washer onto hinge pin.
Tip 2
When installing door onto hinge, please
check the alignment of doorstopper and hinge.
Tip 3
Make sure gasket is properly attached.
Tip 4
Make sure gaps between doors are even.
Tip 5
Don’t forget to add washer onto hinge pin.
Tip 6
Insert the gasket into gasket seat and pull it
with a force of 30N.
DIAGNOSIS 4
CHECK AND TEST 4
Step 1
Place a torch in cabinet and check to see if light
leaks out from gasket.
GO BACK TO COMPONENT LIST