8.6 RELIABILITY FAULTS:
DOOR STOPPER IS BROKEN
CHECK AND TEST 1
Step 1
Push the door to a position with angle of
8o from cabinet, if the door doesn’t close
automatically, there is a problem with the door
stopper.
Step 2
Check the alignment between door stopper
and hinge to find out root causes.
Step 3
Check if bottom hinge is deformed and cause
misalignment.
Step 4
Check if door stopper is deformed and cause
misalignment.
DIAGNOSIS 1
PROCEDURE 1
Step 1
Unscrew hinge cover.
Step 2
Remove the cover.
Step 3
Disconnect the terminals.
Step 4
Unscrew 3 bolts and remove the top hinge.
Step 5
Remove the door.
Step 6
Lay down product so that compressor is resting on foam.
Step 7
Unscrew 4 bolts and remove bottom hinge.
Step 8
Unscrew 2 screws and remove door stopper.
PROCEDURE 2
Tip 1
When installing door onto hinge, please checkthe alignment between door-stopper and hinge.
Tip 2
Make sure gasket is attached well.
Tip 3
Make sure gaps between doors are even.
GO BACK TO FAULT LIST RELIABILITY