PROCEDURE 1

Note
Air-back-to-freezer duct is covered by freezer
air duct, you need to disassemble freezer
air duct and remove evaporator to check.


Step 1

Remove freezer shelf.

Step 2

Unscrew 2 screws.

Step 3

Remove air duct:
a. Hold the air duct from air exit and pull air ductout;

b. Disconnect the terminal of fan motor;

c. Take air duct away.

CHECK AND TEST 1

Step 1

Make sure there is a heat conductor.

Step 2

See if there is ice or foam in air ducts.


Step

If there is ice, use hair dryer to melt.

Step 4

If it is blocked with foam.
Use slotted screw to remove foam.

PROCEDURE 2


Tip 1

Firstly insert the air duct into the slot at the
bottom.

Tip 2

When reinstalling air duct, move wires out
of the way to prevent crushing with air duct.

Tip 3

After pushing air duct back into position, you
should hear a clicking sound. If there is no
click, please repeat again.

DIAGNOSIS 2


GO BACK TO COMPONENT LIST