PROCEDURE 1
Note
Capillary is covered by freezer air duct, you need to disassemble and remove freezer air duct to check.
Step 1
Remove freezer shelf.
Step 2
Lever 2 screw covers off.
Step 3
Unscrew 2 screws.
Step 4
Remove air duct:a. Hold the air duct from air exit and pull air duct out;
c. Disconnect the terminal of fan motor;
d. Take air duct away.
CHECK AND TEST 1
Step 1
Check if:
1. Vibration-absorption soft rubber is missing;
2. Transitional pipe is aligned.
DIAGNOSIS 1
PROCEDURE 2
Tip 1
Firstly insert the air duct into the slot at the
bottom.
Tip 2
When reinstalling air duct, move wires out
of the way to prevent crushing with air duct.
Tip 3
After pushing air duct back into position, you
should hear a clicking sound. If there is no
click, please repeat again.
GO BACK TO COMPONENT LIST