PROCEDURE 1

Note

Defrost heater is covered by freezer air duct, you need to disassemble and remove freezer air duct to check. 

Step 1

Remove freezer shelf. 

Step 2

Lever 2 screw covers off. 

Step 3

Unscrew 2 screws. 

Step 4

Remove air duct: 

a. Hold the air duct from air exit and pull air duct out;

b. Disconnect the terminal of fan motor;

c. Take air duct away.

CHECK AND TEST 1

Step 1

Check if wire is broken. 

DIAGNOSIS 1

PROCEDURE 2

Step 1

Disconnect the terminal of heater. 

Step 2

Take out heat-conducting rod with slotted screw driver.

Step 3

Use 6mm cross-head driver to unscrew on left and right. 

Step 4

Lift evaporator and heater 20mm, the bottom must be higher than the edge of the trough. 

WARNING: 

Be careful not to deform pipes in red square during steps 4 & 5.

Step 5

Loosen the clips for fastening heater. There are 8 clips in total. 

Step 6

Remove the heater. 

Reverse the above process to reinstall the heater.

Reverse steps above to replace the heater. 

CHECK AND TEST 2

Step 1

Perform a leakage test. and examine result. 

DIAGNOSIS 2

 GO BACK TO PRIORITY 3: DEFROST HEATER

 

 GO BACK TO COMPONENT LIST 

PROCEDURE 3

Tip 1

Firstly insert the air duct into the slot at the
bottom.

Tip 2

When reinstalling air duct, move wires out
of the way to prevent crushing with air duct.

Tip 3

After pushing air duct back into position, you
should hear a clicking sound. If there is no
click, please repeat again.

GO BACK TO COMPONENT LIST