8.10 RELIABILITY FAULTS:
BALCONIES NOT ATTACHED SECURELY
CHECK AND TEST 1
Step 1
Check whether balcony detaches when bottle is removed.
Step 2
Reworking method.
Add pieces of plastic to
strengthen fastening.
NOTE
PROCEDURE 1
Step 1
Unscrew hinge cover.
Step 2
Remove the wire cover
on door.
Step 3
Take out hinge
cover.
Step 4
Disconnect door switch.
Step 5
Disconnect the terminal.
Step 6
Loosen 3 bolts.
Step 7
Remove hinge.
Step 8
Remove the door.
Reverse steps above
to install the door. Pay
attention to the key
points below.
Tip 1
1) Make sure gasket is
attached well.
2) Make sure gaps
between doors are even.
GO BACK TO FAULT LIST RELIABILITY