9.3 APPERANCE FAULT LIST:
DOOR IS DAMAGED
GENERAL
PROCEDURES FOR
DISASSEMBLY AND
INSTALLATION DOOR.
Step 1
Unscrew hinge cover.
Step 2
Remove the wire cover
on door.
on door.
Step 3
Take out hinge
cover.
cover.
Step 4
Disconnect door switch.
Step 5
Disconnect the terminal.
Step 6
Loosen 3 bolts.
Step 7
Remove hinge.
Step 8
Remove the door.Reverse steps above
to install the door. Pay
attention to the key
points below.
to install the door. Pay
attention to the key
points below.
Tip 1
1) Make sure gasket is
attached well.
2) Make sure gaps
between doors are even.
attached well.
2) Make sure gaps
between doors are even.
GO BACK TO FAULT LIST APPEARANCE